Premiere Cycling Components

0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
Previous

BB30 Pressfit 24

Previous

ITL Threaded

BB30 Pressfit

Quick Overview

The BB30 Pressfit is designed to fit PF30 frames and it has been redesigned without the sleeve attached to one cup; reducing the weight by 18g. Installed are Folmer TechnologyTM bearings that support 30mm crank sets such as SRAM, RaceFace, and FSA.

$129.00

Availability: In stock

BB30 Pressfit is available for purchase in increments of 1

* Required Fields

$129.00

Details

The BB30 Pressfit is designed to fit PF30 frames and it has been redesigned without the sleeve attached to one cup; reducing the weight by 18g. Installed are Folmer TechnologyTM bearings that support 30mm crank sets such as SRAM, RaceFace, and FSA.

There are 3 different bearing choices to best meet your needs:

  • Standard Bearings: Use for road bikes in dry/no salt environments.
  • Full Stainless Steel Bearings: Use for extreme distance riding (>200miles/week), BMX, MTN, Cycle cross, and other varying conditions.
  • Full Stainless Steel Bearings with CX Seals: The CX seal is for riding conditions where water, dust, and debris can get into the bearing and degrade it prematurely. Use for MTN, BMX, Cycle Cross, or other wet and dirty conditions. NOTE: This is not for timed road biking as the extra seal slightly increases wattage.

The BB30PF has an optional middle tube (Di2) to be used with electronic shifters, such as the Shimano Di2, ensuring the cables do not rub on the crank spindle. The middle tube is available in 41mm (road) and 46mm (mtn) and is sold separately.

  1. Be the first to review this product

Write Your Own Review

Hawk RacingTM bottom brackets have been designed with the pro cyclist in mind. Replace your standard bottom bracket with a new generation bottom bracket that is 10% lighter than ceramic and takes up to 80% less energy than the next most efficient bottom bracket on the market.

Our bottom brackets use exclusively Folmer TechnologyTM bearings (patent pending) which have changed the perception of ceramic bearings by being ultra light weight, durable, and affordable. Our bearings help you make each performance your best and will last without needing frequent service intervals.

These specially designed bearings utilize a high-grade lubrication which is typically used in a slightly different form in the aerospace industry as well as a lighter seal than ceramic bearings. These features help get you to terminal velocity more quickly and easily.

Hawk Racing bearings have been used by Kendra Pro Cycling and Wonderful Pistachio Pro Cycling Teams here in the USA.

The BB30 Pressfit has been redesigned without the sleeve attached to one cup, therefore reducing the weight by 18g. However, if you ride the Shimano Di2 or similar group set, then you will need our clear sleeve (sold separately – 41mm for road, 46mm for MTB) to keep the cables away from the crank spindle. This product is proudly made in the USA!

Weight:

91g for all parts

Colors:

Black

Compatibility: Frame

PF30 frames, Shell Width: 68mm (road) or 73mm (mtn), Shell ID: 46mm

Compatibility: Crankset

30mm spindle cranksets (BB30, PF30)

Service Interval:

Bearings are Lifetime Maintenance Free

Warranty:

1 year manufacturer

Bearings:

Folmer Technology bearings, ISO and ABEC-3 certified – Made in Japan – Non-ceramic

Energy Consumption:

0.34 watts

BB Threads:

No Threads

Ships With:

(2) cups with bearings, (1) wave washer, (5) nylon washers